Top 10 typical forklift crashes ， forklift procedure need to take notice of these issues ！.

Don't take too lightly the forklift at the workplace. If the operation is not good, there will certainly be severe crashes in minutes, and there are lots of accidents including forklifts.

Situation 1: The forklift cargo blocked the motorist's view, and the individual in front might not be discovered, resulting in a moving accident.
Case 2: In order to maintain the equilibrium of the forklift when raising heavy goods, the staff members used their body weight as the counterweight, which practically created casualties.
Situation 3: The size of the forklift cargo goes beyond the allowable size of the route and hangs on the roadside rack, which practically creates an mishap.
Instance 4: Forklift is speeding and surrender during a turn.
Situation 5: The forklift driver did not discover the pedestrian, and the pedestrian did not notice the forklift.
Case 6: The forklift raises the workers illegally, the forklift chauffeur does not use the safety belt, the forklift lifter drops and the chauffeur is squashed when the forklift surrender.
Instance 7: The forklift motorist did not put on a safety belt and dropped from the vehicle when it surrendered and was crushed.
Forklift operation ought to pay attention to these issues ：.

Beginning.
1. Before beginning, observe the environments, and after confirming that there are no obstacles that hinder the security of driving, honk the horn first and afterwards begin.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be risk-free before beginning.
3. When the forklift begins with a load, the driver must first confirm that the load is steady and trustworthy.
4. The beginning needs to be slow and constant.

Driving.
1. When driving, the height between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole should be tilted backward. .
2. Do not lift the fork expensive when driving. When entering and leaving the task site or while driving, beware that there will certainly be no obstacles overhead. When the tons is traveling, the fork has to not be elevated too high, which will certainly affect the security of the forklift. .
3. After unloading, the fork should be lowered to the regular driving position prior to driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal should be provided first. High-speed sharp turns are restricted. High-speed doglegs will certainly trigger the lorry to shed lateral stability and topple. .
5. When the forklift is downhill, it is strictly prohibited to turn off the fire and slide, and it is prohibited to brake suddenly while driving with tons unless there are unique conditions.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and should maintain a specific safety distance from the automobile in front. .
7. When the forklift is running, the load must remain in the lowest placement that does not prevent the driving, and the gantry must be effectively tilted back. The lots shall not be raised other than when piling or filling. .
8. The height of the lots need to not obstruct the chauffeur's sight. In unique conditions, when the thing affects the forward vision, drive at a reduced rate when reversing.
9. It is prohibited to turn on the ramp, neither to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it must drive securely at a reduced speed when going into the production workshop location. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to base on the fork to hold items and play a stabilizing function. .
12. If troubles are discovered, they will be repaired and reported in a timely fashion, and they will never ever run with ailments or hide them.

packing and dumping.
1. When fork-loading products, the range in between both forks must be readjusted as needed to make the tons of both forks balanced and not manipulated, and one side of the item ought to be against the rack. .
2. It is prohibited to collaborate with a solitary fork or utilize a fork top or pull. In unique situations, safety and security indication should be established to remind bordering pedestrians. .
3. In the process of loading and discharging items, the forklift must be stopped with the brake. .
4. The rate of the lorry must be sluggish and stable. Take care not to roll the wheels on the dunnage, so as not to extend the rolled items and injure people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the lots, and it must be kept in mind that the fork tip need to not touch other products or objects. The load ought to be maintained with marginal back tilt of the gantry to make sure that the load does not glide in reverse. The pole can be slanted onward a little when the lots is lowered to permit easy positioning of the lots and removal of the forks. .
6. It is restricted to fork goods at broadband and hit tough objects with the fork head. .
7. When the forklift is working, it is restricted for individuals to loaf the fork, so regarding stay clear of the collapse of the goods and injure people. .
8. Overloading is forbidden, and it is forbidden to utilize forks to raise employees to take part in high-altitude procedures to prevent high-altitude falling mishaps. .
9. It is not enabled to utilize the brake inertia to slide, put, round or roll things. .
10. It is not allowed to make use of forks to select, turn pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you have to unload the goods or lower the fork frame.
2. Pull the parking brake handle to dead or dispirit the emergency brake switch.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the driver does not leave the vehicle's line of vision and does not exceed 1 min).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance ought to be checked, and fuel, lubricating oil and cooling water need to be included.
2. Check the safety and security performance of starting, running and braking.
3. Inspect whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, inspect whether the stress and temperature level are normal.
5. After the forklift is running, the outside leak ought to additionally be inspected and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You have to examine before leaving the cars and truck;.
2. When you come across somebody before you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be too sharp to avoid the propensity of " cost-free turning";.
6. Running up and down the slope needs to be slow-moving and consistent, and no switching on the incline is permitted.
7. Do not drive across the slope. When the slope is greater than Stand-on Electric Pallet Stacker 10%, the lorry needs to be driven backwards when worsening;.
8. When the forklift employees carry the goods and move on, if they experience Stand-on Electric Pallet Stacker huge or heavy goods and most likely to the vehicle driver's line of sight, they need to take the reversing exercise
.
The "Eight Prohibitions" must be adhered to in the procedure.
1. Solitary fork procedure is not permitted.
2. It is not permitted to lift the goods for long distance driving.
3. It is not enabled to get the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to use stopping force to expatriation round or easy-to-roll objects.
7. It is not allowed to bring people to work with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is increased.
8. Do not drive laterally on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, narrow roads, train crossings;.
2. Sections with a longitudinal incline above 5%.
3. When there is an barrier on one side of the road, the opposite side of the area with the very same size as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844